Removal Procedure

1. Remove the assist handle bolts.
2. Remove the assist handle.



3. Remove the instrument panel right lower corner trim.
4. Remove the instrument panel right lower trim.
5. Remove the four relay panel mounting screws and position the panel out of the way.



6. Disconnect the blower motor electrical connector.
7. Remove the blower motor cooling tube.
8. Remove the blower motor screws.
9. Remove the blower motor and fan.

1. Install the blower motor and fan.
2. Install the blower motor screws.
3. Install the blower motor cooling tube.
4. Connect the blower motor electrical connector.
5. Install the four relay panel screws.



6. Install the instrument panel right lower trim.
7. Install the instrument panel right lower corner trim.



8. Install the assist handle.
9. Install the assist handle bolts.

Tighten
Tighten the bolts to 6 N·m (53 lb in).