Turn Signal Lamps and Indicators Inoperative - Front. Isuzu Isuzu MD Steel Tilt (F Model) 1999

For 1990-2009 cars only

Makes 🢒 Isuzu 🢒 1999 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Turn Signal Lamps and Indicators Inoperative - Front

Step	Action	Value(s)	Yes	No
1	Turn the Hazard Switch to the ON position. Disconnect the harness connector from the Turn and Hazard Flasher. Connect a J 39200 between terminal 8 and the chassis ground. Connect a J 39200 between terminal 7 and the chassis ground. Does the DMM indicate continuity for both tests?	--	Go to Step 2	Go to Step 3
2	Replace the Turn and Hazard Flasher. Is the repair complete?	--	System OK	--
3	Replace the Turn Signal and Hazard Switch. Is the repair complete?	--	System OK	--

Step

Action

Value(s)

Yes

Does the DMM indicate continuity for both tests?

Replace the Turn and Hazard Flasher.

Is the repair complete?

System OK

Replace the Turn Signal and Hazard Switch.

Is the repair complete?

System OK