Luminescent Lamp Replacement - Outside Mirror Housing

1. Turn OFF the headlamp switch.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

2. Disconnect the negative battery cables.



3. Remove the illuminated mirror clearance lamp lens by unsnapping the lens from the lens housing.
4. Remove the two lamp housing retaining screws.
5. Disconnect the lamp electrical connectors.
6. Remove the lamp housing.

1. Install the illuminated mirror clearance lamp housing.
2. Connect the clearance lamp electrical connectors.
3. Install the two lamp housing retaining screws.
4. Install the lens by snapping the lens onto the lens housing.
5. Connect the negative battery cables.