GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu H-Series 🢒 Body 🢒 Body Front End 🢒 Wheelhouse Splash Shield Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 887250 Size: SH
  2. Remove the 2 nuts from the rear of the splash shield.

    3. Object Number: 885603 Size: SH
  3. Remove the nut that is at the top of the splash shield.
  4. Remove the splash shield from the vehicle.

Installation Procedure
  1. Install the splash shield to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 887250 Size: SH
  2. Install the 2 nuts to the rear of the splash shield.

    3. Tighten
    Tighten the nuts to 7-11 N·m (61-97 lb in).


    Object Number: 885603 Size: SH
  3. Install the nut that is at the top of the splash shield.
  4. Close the hood.