Inspection Procedure
- Release the primary hood latch in order to inspect the operation of the pop-up spring.
- Attempt to raise the hood while the hood is in the pop-up position.
ā¢ | The hood should raise without the hood striker binding against the latch. |
ā¢ | The secondary latch should engage in order to prevent the hood from being raised. |
Adjustment Procedure
- Loosen the bolts retaining the hood latch to the support bracket.
Caution: Refer to Fastener Caution in the Preface section.
- Move the hood latch from side to side until the striker enters the center of the latch assembly and tighten to
10 NĀ·m (89 lb in).