GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure
  1. Remove the front seat assembly. Refer to Front Seat Replacement - Bucket.

    2. Object Number: 752865 Size: SH
  2. Disconnect the seat belt reminder wiring harness (3) on the driver seat.

    3. Object Number: 755837 Size: SH
  3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
  4. Remove the seat belt buckle from the seat assembly.

Installation Procedure

    Object Number: 755837 Size: SH
  1. Install the seat belt buckle to the seat assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the nut (1) which retains the seat belt buckle to the seat assembly. Tighten the front seat belt buckle nut to 52 N·m (38 lb ft).

    3. Object Number: 752865 Size: SH
  3. Connect the seat belt reminder wiring harness (3) on the driver seat.
  4. Install the front seat assembly. Refer to Front Seat Replacement - Bucket.