Caution: Refer to Brake Dust Caution in the Preface section.

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the rear brake caliper and bracket . Refer to Rear Brake Caliper Bracket Replacement .



4. Remove the rear brake rotor.
5. Inspect the park brake shoe and lining and replace if any of the following conditions are found:

•	Excessive wear indicated by the park brake lining being worn down to the shoe

•	Brake lining cracking

•	Oil or fluid contamination of the brake lining

6. Adjust the park brake shoe. Refer to Park Brake Adjustment .
7. Install the rear brake rotor.



8. Install the rear brake caliper and bracket. Refer to Rear Brake Caliper Bracket Replacement .
9. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
10. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .