GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Viva 🢒 Transmission 🢒 Automatic Transmission - Aisin 81-40LE 🢒 Input Speed Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1245830 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the input shaft speed (ISS) sensor electrical connector.

    3. Object Number: 1245829 Size: SH
  3. Remove the ISS sensor retaining bolt.
  4. Remove the ISS sensor from the transaxle.

Installation Procedure

    Object Number: 1245829 Size: SH

    Important: Lubricate the O-ring with ISU DEXRON III.

  1. Install a new O-ring on the ISS sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ISS sensor and retaining bolt into the transaxle case and tighten to 5.4 N·m (48 lb in).

    3. Object Number: 1245834 Size: SH
  3. Connect the ISS sensor electrical connector.
  4. Connect the negative battery cable.