GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Viva 🢒 Suspension 🢒 Rear Suspension 🢒 Trailing Arm Bracket Replacement

Removal Procedure

    Object Number: 1290735 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the trailing link-to-trailing link bracket nut and the bolt.
  3. Remove the trailing link bracket-to-body bolts.

    4. Object Number: 1290736 Size: SH
  4. Remove the trailing link bracket.

Installation Procedure

    Object Number: 1290736 Size: SH
  1. Install the trailing link bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1290734 Size: SH
  2. Install the trailing link bracket-to-body bolts and tighten to 70 N·m (52 lb ft).
  3. Connect the trailing link to the trailing link bracket by installing the bolt and the trailing link-to-trailing link bracket nut and tighten to 100 N·m (74 lb ft).
  4. Lower the vehicle.