For 1990-2009 cars only
Removal Procedure
- Raise and properly support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Position an appropriate drain pan under the engine.
- Remove the oil pan drain plug bolt.
- Remove the oil filter.
Installation Procedure
- Install the oil filter and tighten to 15 N·m (11 lb ft).
- Discard the used oil pan drain plug washer and replace with a new oil pan drain plug washer.
- Install the oil pan drain plug bolt and tighten to 35 N·m (26 lb ft).
- Lower the vehicle.
- Fill the engine with oil to the appropriate mark.
- Start engine and inspect for leaks.
Caution: Refer to Fastener Caution in the Preface section.
