Notice: Refer to Fastener Notice in the Preface section.
- Install the fender with the upper fender bolts.
Tighten
Tighten the upper fender bolts to 10 N·m (89 lb in).
- Reposition the air inlet weatherstrip to its original position.
- Install the bolt at the base of the windshield pillar.
Tighten
Tighten the windshield pillar fender bolt to 10 N·m (89 lb in).
- Install the bolts at the base of the fender.
Tighten
Tighten the lower fender bolts to 10 N·m (89 lb in).
- Install the front fender bolts behind the front fascia.
Tighten
Tighten the front fender bolts to 10 N·m (89 lb in).
- Install the front fascia to its original position.
- Install the bolts securing the front fascia to the fender.
Tighten
Tighten the front fascia-to-fender bolts to 2.5 N·m (22 lb in).
- Install the front headlamp to its original position.
- Install the front wheel well splash shield. Refer to
Wheelhouse Splash Shield Replacement .