GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Holden
🢒
2007
🢒
VE Sedan
🢒
Engine
🢒
Engine Controls and Fuel - 6.0L
🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
Relieve the fuel system pressure. Refer to the
Fuel Pressure Relief
.
Disconnect the EVAP engine pipe (2) to EVAP chassis tube. Refer to
Plastic Collar Quick Connect Fitting Service
.
Disconnect the EVAP engine tube (3) to throttle body. Refer to
Plastic Collar Quick Connect Fitting Service
.
Disconnect the wiring connector from the EVAP purge solenoid.
Remove the EVAP purge solenoid (1) from the vehicle.
Installation Procedure
Install the EVAP purge solenoid (1) to the vehicle.
Connect the wiring connector to the EVAP purge solenoid.
Connect the EVAP engine tube (3) to throttle body. Refer to
Plastic Collar Quick Connect Fitting Service
.
Connect the EVAP engine pipe (2) to EVAP chassis tube. Refer to
Plastic Collar Quick Connect Fitting Service
.