Safety Compliance Label
The safety compliance label (1) is located on the left hand B pillar (2)..
The safety compliance plate contains the following information:
| • | Compliance plate approval number |
| • | Name appearing on compliance plate approval |
| • | Gross Vehicle Mass (GVM) - This is the maximum loaded mass at which the
vehicle complies with the approved design rules. Not required for passenger vehicles.
Required for utility, regular cab, and crew cab vehicles. |
| • | Seating capacity - The number of adult positions for which seat belts
are provided. |
| • | Date of manufacture - The day, month and year that the vehicle is manufactured. |
| • | International Standards Vehicle Identification Number (ISOVIN) |
Fuel Consumption Label
From 1 January 2004, ADR 81/01 requires that all new domestic vehicles displayed
for sale have a label attached to the windscreen similar to that shown above.
The Comparative fuel consumption figure and Comparative Carbon Dioxide emissions
value quoted are the results of tests carried out in accordance with the ECE R101/00.
This new Australian standard for fuel consumption and Carbon Dioxide emission testing
harmonises our emission and consumption standards with those recognized internationally.
Each vehicle is tested under identical conditions. The tests therefore enable a comparison
to be made between vehicles.
The label should be removed from the windscreen immediately prior to the vehicle
being delivered to the owner.
