Exhaust Manifold Installation - Left Side CSV HSV VXR8
- Install a NEW exhaust manifold gasket (1) and
NEW sealing ring (3) to the exhaust manifold (2).
Notice: Refer to Exhaust System Inspection Notice in the Preface section.
- Install the exhaust manifold assembly (2) to the engine.
Important: Do not fully tighten the exhaust manifold
to cylinder head retaining bolts (1) at this stage.
- Install the NEW exhaust manifold to cylinder head retaining bolts (1).
Do not fully tighten at this stage.
- Clean the threads of the exhaust manifold to catalytic converter
retaining studs with a suitable cleaning solvent.
Important: Make sure the sealing ring is seated correctly.
- Install the left side catalytic converter. Refer to
Catalytic Converter Replacement - Left Side.
- Tighten the exhaust manifold to cylinder head retaining bolts (1)
working from the centre to the outside.
Tighten
Tighten the bolts to 20 Nm (15 lb ft).