GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Heater and Air Conditioning Control Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 2030394 Size: SH

    Note: Left-Hand Drive Shown, Right-Hand Drive Similar.

  1. Disconnect the negative battery cable.
  2. Remove the audio system trim plate. Refer to Radio Replacement.
  3. Remove the 4 controller retaining screws.

    4. Object Number: 2030395 Size: SH
  4. Disconnect the electrical connectors.
  5. Remove the control assembly.

Installation Procedure

    Object Number: 2030395 Size: SH
  1. Connect the electrical connectors to the sockets on the back of the controller.
  2. Gently insert the controller into position on the center console.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2030394 Size: SH
  3. Install the retaining screws.

    4. Tighten
    Tighten the controller retaining screws to 4 N·m (35 lb in).

  4. Connect the negative battery cable.
  5. Confirm the proper operation of the controller by moving it through all of the controller's possible functioning positions.
  6. Install the audio system trim plate. Refer to Radio Replacement.