GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Sun Load Temperature Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1256122 Size: SH
  1. Disconnect the negative battery cable.
  2. Gently pry up on the sun sensor to remove it.

    3. Object Number: 1256123 Size: SH
  3. Secure the electrical connector to prevent it from falling beneath the dash.
  4. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1256123 Size: SH
  1. Connect the electrical connector.

    2. Object Number: 1256122 Size: SH
  2. Insert and press the sun sensor into position in the dash.
  3. Connect the negative battery cable.