GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Seat Back Cushion Side Bolster Panel Replacement

Removal Procedure

    Object Number: 1256728 Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the bolt that secures the rear seat side bolster cushion.
  3. Lift and remove the rear seat side bolster cushion.

Installation Procedure

    Object Number: 1256728 Size: SH
  1. Slide the rear seat side bolster cushion into the retaining brackets.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the rear seat side bolster cushion with the bolt and tighten to 25 N·m (18 lb ft).
  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.