GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Brakes 🢒 Antilock Brake System 🢒 Vehicle Yaw Sensor Replacement

Removal Procedure

    Object Number: 2006091 Size: SH
  1. Turn the ignition to Off.
  2. Remove the center console. Refer to Front Floor Console Replacement.
  3. Disconnect the yaw rate sensor connector (2).
  4. Remove the yaw rate sensor attaching bolts.
  5. Remove the yaw rate sensor (1).

Installation Procedure

    Object Number: 2006091 Size: SH
  1. Install the yaw rate sensor (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the yaw rate sensor attaching bolts and tighten to 9 N·m (80 lb in).
  3. Connect the yaw rate sensor connector (2).
  4. Install the center console. Refer to Front Floor Console Replacement.