GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Suspension 🢒 Tires and Wheels 🢒 Rear Bumper Fascia Extension Replacement

Removal Procedure

    Object Number: 2002214 Size: SH
  1. Remove the rear molding (1) bonded by the 2-sided tape.

    2. Object Number: 2002215 Size: SH
  2. Remove the upper screws.

    3. Object Number: 2002216 Size: SH
  3. Remove the rear side screws.

    4. Object Number: 2002217 Size: SH
  4. Remove the retaining clips and the lower screws.

    5. Object Number: 2002218 Size: SH
  5. Remove the nuts.

    6. Object Number: 2002219 Size: SH
  6. Remove the rear lower fascia extension.

Installation Procedure

    Object Number: 2002219 Size: SH
  1. Install the lower fascia extension.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2002218 Size: SH
  2. Install the nuts and tighten to 2 N·m (18 lb in).

    3. Object Number: 2002217 Size: SH
  3. Install the lower screws and clips and tighten to 2 N·m (18 lb in).

    4. Object Number: 2002216 Size: SH
  4. Install the side screws and tighten to 2 N·m (18 lb in).

    5. Object Number: 2002215 Size: SH
  5. Install the center screws and tighten to 2 N·m (18 lb in).

    6. Object Number: 2002214 Size: SH
  6. Install new 2-sided tape to the rear molding and install the rear molding (1) to the rear lower fascia extension.