GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Safety and Security 🢒 Seat Belts 🢒 Front Seat Belt Retractor Replacement

Removal Procedure

    Object Number: 1761017 Size: SH
  1. Remove the bolt (2) and the lower seat belt anchor (1).

    2. Object Number: 1761019 Size: SH
  2. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Garnish Molding Replacement.
  3. Remove the cap to reveal the upper seat belt anchor (2).
  4. Remove the screws (3) and the seat belt guide (4).
  5. Remove the bolt (1) and the upper seat belt anchor (2).

    6. Object Number: 1793321 Size: SH
  6. Remove the screw (1) from the seat belt retractor bracket.
  7. Remove the bolt (3) and the seat belt retractor (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1793321 Size: SH
  1. Install the seat belt retractor (2) with the bolt (3) and tighten to 38 N·m (28 lb ft).
  2. Install the seat belt retractor bracket screw (1) and tighten to 10 N·m (7 lb ft).

    3. Object Number: 1761019 Size: SH
  3. Install the upper seat belt anchor (2) with the bolt (1) and tighten to 38 N·m (28 lb ft).
  4. Install the seat belt guide (4) with the screws (3) and tighten to 3 N·m (27 lb in).
  5. Install the seat belt guide anchor cap.

    6. Object Number: 1761017 Size: SH
  6. Install the lower center pillar trim panel. Refer to Center Pillar Lower Garnish Molding Replacement.
  7. Install the lower seat belt anchor (1) with the bolt (2) and tighten to 38 N·m (28 lb ft).