GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Engine 🢒 Engine Mechanical - 2.0L (Diesel) 🢒 Crankshaft and Bearing Installation

    Object Number: 2027942 Size: SH

    Note: Lubricate the crankshaft bearings and crankshaft with new engine oil.

  1. Install the 5 crankshaft bearings (1) in their original position.

    2. Note: Take extreme care to prevent any scratches, nicks or damage to the crankshaft.

  2. Install the crankshaft (3).
  3. Install the crankshaft position sensor inner excitor ring (5).

    4. Caution: Refer to Fastener Caution in the Preface section.

    Note: Insert bolts with bolt locking compound.

  4. Install the 3  crankshaft position sensor inner excitor ring bolts (6) and tighten to  12 N·m (107 lb in).
  5. Install the crankshaft gear (2).
  6. Install the 5 crankshaft bearings (4) in their original position.