GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Engine 🢒 Engine Controls and Fuel - 2.2L or 2.4L 🢒 Evaporative Emission Canister Replacement

Removal Procedure

    Object Number: 1760897 Size: SH

    Warning: Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

  1. Disconnect the canister fuel vapor hoses from the canister.

    2. Object Number: 1760894 Size: SH
  2. Loosen the clamp and disconnect the evaporative emission (EVAP) canister vent hose from the EVAP canister filter

    3. Object Number: 1760900 Size: SH
  3. Remove the EVAP canister bracket retaining nuts and the EVAP canister assembly.
  4. Separate the canister from the EVAP canister bracket.
  5. Remove the canister.

Installation Procedure

    Object Number: 1760900 Size: SH
  1. Install the EVAP canister onto the EVAP canister bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the EVAP canister assembly.

    3. Tighten
    Tighten the EVAP canister bracket retaining nuts to 10 N·m (88 lb in).


    Object Number: 1760898 Size: SH
  3. Connect the EVAP canister vent hose to the EVAP canister filter.

    4. Object Number: 1760897 Size: SH
  4. Connect the canister fuel vapor hoses to the canister.