Preliminary Procedures

1. Remove the cowl side trim panel. Refer to Cowl Side Trim Panel Replacement.
2. Remove I/P compartment door. Refer to Instrument Panel Compartment Door Replacement.
3. Remove I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side.
4. Remove right side courtesy lamp.
5. Remove relay.

Tip
Reposition right corner of I/P to gain clearance to blower motor for removal.

1

Blower Motor Resistor Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Blower Motor Resistor

3

Blower Motor Screw (Qty: 3)

Tighten
1.5 N·m (13 lb in)

4

Blower Motor Assembly

Preliminary Procedures

1. Remove the cowl side trim panel. Refer to Cowl Side Trim Panel Replacement.
2. Remove I/P compartment door. Refer to Instrument Panel Compartment Door Replacement.
3. Remove I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side.
4. Remove left side courtesy lamp.
5. Remove relay.

Tip
Reposition right corner of I/P to gain clearance to blower motor for removal.

1

Blower Motor Resistor Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Blower Motor Resistor

3

Blower Motor Screw (Qty: 3)

Tighten
1.5 N·m (13 lb in)

4

Blower Motor Assembly