Preliminary Procedure

1. Drain the cooling system. Refer to Cooling System Draining and Filling.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
3. Use J 38185 to release the heater hose clamp.

1

Heater Inlet/Outlet Hose Clamp (Qty: 2) at Engine

2

Heater Inlet/Outlet Hose Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
12 Nm (9 lb ft)

3

Heater Inlet/Outlet Hose Quick Connect Fitting

4

Coolant Air Bleed Clamp

5

Coolant Air Bleed Hose

6

Heater Inlet/Outlet Hose