Preliminary Procedures

1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket.
2. Remove the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement.

1

Seat Back Frame Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Seats Cushion Frame Nut

Tighten
25 N·m (18 lb ft)

3

Seat Cushion Frame Assembly

Tip
Remove the wiring harness retainers.

4

Seat Adjuster Assembly

Tip
If replacing the seat adjuster mechanism, remove the seat position sensor and retain to use on the new adjuster. Refer to Inflatable Restraint Seat Position Sensor Replacement.