GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H3 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Lock Cylinder Control Solenoid Replacement

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.


    Object Number: 1663830 Size: SH
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
  2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement.
  3. Remove the ignition lock cylinder solenoid.

Installation Procedure

    Object Number: 1663830 Size: SH
  1. Install the ignition lock cylinder solenoid.
  2. Install the steering column shroud. Refer to Steering Column Shroud Replacement.
  3. Enable the SIR system. Refer to SIR Disabling and Enabling.