Preliminary Procedures

1. Remove the rear inner wheelhouse panel. Refer to Rear Wheelhouse Panel Liner Replacement.
2. Remove the rear bumper. Refer to Rear Bumper Impact Bar Replacement.

1

Filler Extension Rear Bumper Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Open the endgate to access the inside upper bumper extension filler screw.

Tighten
2 N·m (18 lb in)

2

Extension Rear Bumper Filler Lower Bolt (Qty: 2)

Tighten
9 N·m (80 lb in)

3

Wheelhouse Opening Flare Bolt (Qty: 2)

Tighten
9 N·m (80 lb in)

4

Extension Rear Bumper Filler

Tip
Pull front edge outward from under wheel opening flare and push filler extension rearward to remove.