Special Tools

Warning: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.

1. Apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim, to help prevent damage.

Warning: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.

2. Cover the seats and carpeting to protect from broken glass as necessary.

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.





Note: Keep the cutting edge of the tool against the quarter window.

3. This will allow the urethane adhesive to be separated from the quarter window.

•	Leave a base of urethane on the pinchweld flange.

•	The only suitable lubrication is clear water.

•	Use J 24402-A , J 39032 or equivalent in order to remove the quarter window.

4. If the locator pins were damaged during removal, they must be replaced.



5. With the aid of an assistant, use the suction cups to remove the window from the opening.

1. Install the quarter window into the opening. Refer to Adhesive Installation of Stationary Windows.
2. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.