GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 942154 Size: SH
  2. Remove the insulator clamp bolts.
  3. Remove the clamps.
  4. Remove the insulators.
  5. Inspect all of the parts for wear and damage.

Installation Procedure

    Object Number: 942154 Size: SH
  1. Install the insulators to the stabilizer shaft .
  2. Install the clamps over the insulators and the stabilizer shaft.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install insulator clamp bolts.

    4. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  4. Lower the vehicle.