Preliminary Procedure

Remove the rear seat number 2 seat cushion cover and pad. Refer to Rear Seat Number 2 Cushion Cover and Pad Replacement.

1

Rear Seat Number 2 Back Cushion Latch Inner Finish Cover Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Rear Seat Number 2 Back Cushion Latch Inner Finish Cover

3

Rear Seat Number 2 Back Cushion Latch Cable Assembly

Procedure

1. Note location and routing of the cable prior to removal in order to ensure proper reinstallation.
2. Disconnect both ends of the cable and remove from the seat assembly.