GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Hinge Replacement

Removal Procedure

    Warning: Refer to Hood Hold-Open Device Warning in the Preface section.


    Object Number: 820616 Size: SH
  1. With the hood properly supported, remove the nuts (1) retaining the hood to the hinge.
  2. With the hood still supported, remove the bolts (2) retaining the hinge to the front bumper support.
  3. Remove the hinge.
  4. With the aid of an assistant, carefully close the hood.

Installation Procedure

    Object Number: 820616 Size: SH
  1. With the hood properly supported, position the hinge to the front bumper support.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts (2) retaining the hinge to the front bumper support.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the nuts (1) retaining the hinge to the hood.

    4. Tighten
    Tighten the nuts to 18 N·m (13 lb ft).

  4. Adjust the hood, if necessary.