Tools Required

J 45756 Rear Output Shaft Seal Installer

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the rear propeller shaft. Refer to Rear Propeller Shaft Replacement .
3. Remove the rear output shaft seal by prying it out with a flat-tipped screwdriver.

1. Using J 45756 , install a NEW front output shaft seal.
2. Install the rear propeller shaft. Refer to Rear Propeller Shaft Replacement .
3. Check the fluid level. Add fluid, if necessary.
4. Lower the vehicle.