GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Front Axle Vent Hose Connector Replacement

Removal Procedure
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle.
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement.

    3. Object Number: 1335147 Size: SH
  3. Disconnect the vent hose from the vent hose connector.

    4. Object Number: 1335150 Size: SH
  4. Remove the vent hose connector.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1335150 Size: SH
  1. Install the vent hose connector.

    2. Tighten
    Tighten the vent hose connector to 20 N·m (15 lb ft).


    Object Number: 1335147 Size: SH
  2. Connect the vent hose to the vent hose connector.
  3. Install the engine protection shield. Refer to Engine Protection Shield Replacement.
  4. Lower the vehicle.