Removal Procedure
- Remove the engine mount-to-frame bracket bolts. (Right side shown, left side similar).
- Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the engine shield bolts.
- Remove the engine shield.
Note: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
- Raise and suitably support the engine using adjustable (screw type) jack stands.
- Remove the engine mount bolts.
- Remove the engine mount.
Installation Procedure
- Position the engine mount to the engine.
Caution: Refer to Fastener Caution in the Preface section.
- Install the engine mount bolts.
Tighten
Tighten the engine mount bolts to 50 N·m (37 lb ft).
- Lower the engine.
- Remove the adjustable jack stands.
- Position the engine shield to the vehicle.
- Install the engine shield bolts.
Tighten
Tighten the engine shield bolts to 30 N·m (22 lb ft).
- Lower the vehicle.
- Install the engine mount-to-frame bracket bolts (right side shown, left side similar).
Tighten
Tighten the engine mount-to-frame bracket bolts to 65 N·m (48 lb ft).