A power window switch is located on the armrest of each side door. The switches operate while the ignition is in RUN or ACCESSORY or while Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) .

The driver's door also has a switch for each of the passenger's windows.

Press the front of the switch to the first position to lower the window to the desired level. Pull up the front of the switch to raise the window.

Express-Down Windows

The driver's and front passenger's window switches have an express-down feature which allows the window to be lowered fully without continuously pressing the switch. Press the front of the window switch down all the way and release. Express-down can be interrupted at any time by pulling up the front of the switch.

Window Lockout

This feature prevents passengers from operating their windows.

(Window Lockout): This button is located near the power window switches on the driver's door. A light in the lockout button will come on to show that lockout has been activated. Press the button again to return to normal operation.

Global Window Feature

The global window up and express-down buttons are located on the driver's door.

This feature allows all side windows and Midgate® window, if equipped, to be opened or closed at the same time.

(Window Express-Down):  Press the express-down button to lower all side windows and Midgate® window, if equipped, without stopping. Express-down will operate while the ignition is in RUN or ACCESSORY, or while Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) . If the key is out of the ignition, express-down will only activate while the driver's door is open and the content theft-deterrent system is disabled. To stop the express-down, press the up button. Pressing the global express-down button also activates the power Midgate® latch release buttons, if equipped. See "Lowering the Midgate®" under Midgate® .

(Window Up): Press and hold the up button to raise the four side windows and, if equipped, the Midgate® window. The up button operates while the ignition is in RUN or ACCESSORY, or while RAP is active.

Midgate® Window

If your vehicle has a Midgate®, the switch to operate the window is located on the instrument panel to the left of the steering wheel. See Instrument Panel Overview .

(Midgate® Window): Press the bottom of the switch to express-down the window. Press the top of the switch to express-up the window. Press the top or bottom of the switch a second time to stop the window.

The window switch will operate while the ignition is in RUN or ACCESSORY, or while Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) .

The window can also be operated using the global window buttons. See "Global Window Feature" previously.

Caution: If express override is activated, the midgate window will not reverse automatically. You or others could be injured and the window could be damaged. Before you use express override, make sure that all people and obstructions are clear of the midgate window path.

Midgate® Window Express Override Mode

If an obstruction or weather condition such as severe icing stops the window as it is moving upward, the window will automatically reverse to a partially open position. The window will return to normal operation once the obstruction or condition is removed.

The window auto-reversal function can be overridden in the express override mode. To override, the window must be operated manually by pressing and holding the Midgate® window switch or the global window button. This must be done within two seconds after the Midgate® window has stopped at a partially open position. The express override mode only works immediately following a window auto-reversal. Window express functions will not work while in this mode.

Midgate® Window Error/Jog Mode

If the Midgate® window has sensed conditions which may lead to damage or malfunction of the window system, the window will automatically go into Error/Jog mode. In this mode, window express functions will not work. The window can only be operated manually by pressing the Midgate® window switch or the global window button. The window will move slightly and stop. Press and hold the window switch or global window button to continue to close the window a small amount at a time.

To Exit Error/Jog Mode

1. Ensure normal Midgate® window operating conditions have begun.
2. Press and hold the Midgate® window down switch approximately one second to start window express-down.
3. Release the window down switch and allow the window to fully open.

Do not use any window switches once window movement has started.

4. Press the Midgate® window up switch and visually confirm that the express-up has been completed.