GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
HUMMER
🢒
2005
🢒
H2
🢒
Accessories
🢒
Entertainment
🢒 Radio Replacement
Removal Procedure
Important:
Record the lock code before removal, if equipped.
Loosen and move the center console reward for access to the center trim panel. Refer to
Console Replacement
in Instrument Panel, Gages and Console.
Remove the screws that hold the trim plate - instrument panel (I/P) center from I/P. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gages and Console.
Remove the bolts that hold the radio to the I/P center stack.
Disconnect the electrical connectors and the antenna connections from the rear of the radio.
Remove the radio.
Installation Procedure
Align the radio with the center stack and mounting holes.
Connect the electrical connectors and the antenna connectors from the rear of the radio.
Install the bolts that hold the radio to the I/P center stack.
Align the trim panel I/P center to the I/P. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gages, and Console.
Align and move the forward center console in place with the center console bracket. Refer to
Console Replacement
in Instrument Panel, Gages and Console.
Setup the new radio assembly. Refer to
Control Module References
in Computer/Integrating Systems.