Removal Procedure
- Lower the midgate window to the full open/down position.
- Open the midgate.
- Remove the screws retaining the midgate latch striker to the body.
- Remove the midgate latch striker and shim (if equipped) from the pillar.
Installation Procedure
- Install the midgate latch striker and shim, if equipped, to the pillar.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws retaining the striker to the pillar .
Tighten
Tighten the screws retaining the midgate latch striker to 10 Nยทm (89 lb in).
- Close the midgate.
- Verify midgate latch operation.
- Close the window.