Tools Required

1. Apply J 36850 to the vacuum modulator O-ring (2).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Use the J 23100 in order to install the vacuum modulator plunger (3) into the transmission.

Tighten
Tighten the vacuum modulator (1) to 52 N·m (38 lb ft).




3. Install the vacuum hose and pipe (1) to the vacuum modulator (2).
4. Lower the vehicle.