- Remove the air pipe nut (1)
(if equipped).
- Remove the air pipe bolts (3) (if equipped).
- Remove the air pipe (2) (if equipped).
- Remove the air pipe gasket (4) (if equipped).
- Remove the exhaust manifold heat shield.
- Remove the oxygen sensor.
- Remove the exhaust manifold
to the cylinder head retaining nuts.
- Remove the exhaust manifold.
- Clean all of the sealing surfaces.
- If the exhaust manifold is being replaced, transfer the following
parts:
• | The exhaust manifold heat shield |
• | Replace the exhaust manifold nuts |