GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2006
🢒
Yukon XL - 4WD
🢒
Body
🢒
Doors
🢒 Front Door Opening Weatherstrip Replacement
Removal Procedure
Open the door.
Remove the sill plate. Refer to
Front Side Door Sill Plate Replacement
in Interior Trim.
Remove the hinge pillar trim panel. Refer to
Body Hinge Pillar Trim Panel Replacement
in Interior Trim.
Remove the windshield pillar molding. Refer to
Windshield Pillar Garnish Molding Replacement
in Interior Trim.
Remove the weatherstrip from the rear side door opening. Peel the unit away from channel, pulling the weatherstrip from the pinchweld flange.
Installation Procedure
Install the weatherstrip from the rear side door opening fully seating the weatherstrip into the channel.
Install the windshield pillar molding. Refer to
Windshield Pillar Garnish Molding Replacement
in Interior Trim.
Install the hinge pillar trim panel. Refer to
Body Hinge Pillar Trim Panel Replacement
in Interior Trim.
Install the sill plate. Refer to
Front Side Door Sill Plate Replacement
in Interior Trim.
Check door closing effort and seal to door fit.