GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 833288  Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the screw (2) that retains the switch panel bezel (1) to the front door trim panel.

  3. Object Number: 811888  Size: SH
  4. Remove the switch panel bezel from the door panel using a flat-bladed tool.

  5. Object Number: 833443  Size: SH
  6. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
  7. Remove the door module from the switch panel bezel.

Installation Procedure


    Object Number: 833443  Size: SH
  1. Install the door module into the switch panel bezel until it snaps into place.
  2. Install the switch panel bezel and module into the door trim panel.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 833288  Size: SH
  4. Install the screw (2) that retains the switch panel bezel (1) to the front door trim panel.
  5. Tighten
    Tighten the screw (2) to 2 Nยทm (18 lb in).

  6. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  7. Perform the necessary setup and programming procedures. Refer to Control Module References for programming and setup information.