GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 TopKick C-Series (Conventional) C4/C5 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure
  1. Remove the air cleaner layer. Refer to Air Cleaner Replacement.

    2. Object Number: 696195 Size: SH
  2. Disconnect the evaporative emission (EVAP) canister purge valve harness connector (1).

    3. Object Number: 695582 Size: SH
  3. To disconnect the EVAP purge pipe connector (1), slide the retaining tab (2) to the release position and separate the connection.
  4. Disconnect the EVAP purge pipe connector from the EVAP canister purge valve.

    5. Object Number: 693633 Size: SH
  5. Remove the EVAP canister purge valve retaining bolt (2).
  6. Remove the EVAP canister purge valve (1).

Installation Procedure

    Object Number: 693633 Size: SH
  1. Position the EVAP canister purge valve (1) on the intake manifold.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the EVAP canister purge valve retaining bolt (2).

    3. Tighten
    Tighten the EVAP purge valve retaining bolt to 10 N·m (89 lb in).


    Object Number: 695582 Size: SH
  3. To connect the purge pipe connector (1), press the components together in order to snap the tab (2) in place.
  4. Connect the purge pipe to the EVAP canister purge valve.

    5. Object Number: 696195 Size: SH
  5. Connect the EVAP canister purge valve harness connector (1).
  6. Install the air cleaner layer. Refer to Air Cleaner Replacement.