Note: Take care when handling the mass air flow (MAF). Do Not dent, puncture, or otherwise damage the honey well located at the air inlet end of the MAF. Do Not touch the sensing elements or allow anything, including solvents and lubricants, to come in contact with them. A small amount of GM lubricant P/N 99855406 may be used on the air duct only to aid in installation. Do Not drop or roughly handle the MAF.
Caution: Refer to Fastener Caution in the Preface section.
Tighten
Tighten all clamp screws to 2.5 N·m (22 lb in).