Warning: Refer to Fuel and Evaporative Emission Pipe Warning in the Preface section.

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
2. Open the hood.
3. Remove the left side splash shield. Refer to Wheelhouse Splash Shield Replacement.

Note: 

•	Clean all the fuel pipe connections and the surrounding areas before disconnecting the pipes in order to avoid possible contamination of the fuel system.

•	Cap all fuel pipes to avoid possible contamination of the fuel system.




4. Disconnect the fuel feed line from the fuel filter pipe.
5. Unclip the fuel filter pipe retaining clip.
6. Remove the fuel filter pipe from the fuel filter head.

1. Install the fuel feed pipe to the fuel filter head.
2. Connect the fuel feed pipe to the retainer.
3. Connect the fuel feed line to the fuel feed pipe.
4. Inspect for fuel leaks.