GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2009
🢒
Terrain
🢒
Transmission
🢒
Automatic Transmission - AF33-5
🢒 Output Speed Sensor Replacement
Removal Procedure
Disconnect the wiring harness (2) from the output shaft speed sensor.
Remove the output speed sensor bolt (3).
Remove the output shaft speed sensor (2) and the O-ring (1).
Installation Procedure
Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring (1).
Install the new output speed sensor O-ring (1) onto the output speed sensor (2).
Install the output speed sensor (2) into the transmission case assembly.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the output speed sensor bolt (3) and tighten to
6 N·m (53 lb in)
.
Connect the wiring harness (2) to the output shaft speed sensor.