For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the fluid level hole plug (1).
- Drain transmission fluid into a suitable container.
- Install the fluid level hole plug (1) and tighten to 12 N·m (106 lb in) .
Caution: Refer to Component Fastener Tightening Caution in the Preface section.
Installation Procedure
- Lower the vehicle.
- Remove the fluid fill cap (1).
- Fill the transmission to the proper level with the correct fluid. Refer to Transmission General Specifications and Fluid Capacity Specifications .
- Install the fluid fill cap (1).
