Input Shaft Pilot Bearing Replacement. GMC Truck Sierra

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Sierra - 4WD 🢒 Transmission 🢒 Transfer Case - MP 1625/1626-NQF 🢒 Input Shaft Pilot Bearing Replacement

Input Shaft Pilot Bearing Replacement Heavy Duty and Super Heavy Duty

Callout

Component Name

Ensure the bearing is installed squarely into the input shaft bore.

Transfer Case Input Shaft Pilot Bearing Retaining Ring

Tip
The pilot bearing retaining ring must be removed and installed before and after the pilot bearing is replaced.

Transfer Case Input Shaft Pilot Bearing

Tip

•	Using a suitable adapter and an arbor press, remove the input shaft pilot bearing by going through the front of the input shaft.

•	Install the bearing using the large side of the DT-48212 bearing installer .

•	Press the bearing until the tool bottoms on the input shaft.

•	DT-48212 Input Shaft Pilot Bearing Installer

•	J 8092 Universal Driver

For equivalent regional tools, refer to Special Tools.