Brake and Accelerator Pedal Adjuster Position Sensor Replacement With Memory Seats

1. Turn the ignition switch to the OFF position.
2. Remove the driver knee bolster. Refer to Knee Bolster Replacement.



3. Disconnect the adjustable pedal position sensor jumper harness electrical connector (1).



4. Remove the adjustable pedal position sensor bolts (1).



5. Remove the brake and accelerator pedal adjuster position sensor (1).

1. Install the brake and accelerator pedal adjuster position sensor (1).

Caution: Refer to Fastener Caution in the Preface section.




2. Install the adjustable pedal position sensor bolts (1) and tighten to  2 N·m (18 lb in).



3. Connect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Install the driver knee bolster. Refer to Knee Bolster Replacement.