GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2009
🢒
Savana - AWD
🢒
Driveline/Axle
🢒
Propeller Shaft
🢒 Driveline Support Replacement
Removal Procedure
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Support the propeller shaft with safety stands.
Remove the center bearing bolts (3).
Remove the propeller shaft hanger bolts.
Remove the propeller shaft hanger.
Installation Procedure
Install the propeller shaft hanger.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the propeller shaft hanger bolts and tighten to
52 N·m (38 lb ft)
.
Install the center bearing (5) to the propeller shaft hanger (1).
Install the center bearing support bolts (3) and tighten to
40 N·m (30 lb ft)
.
Remove the safety stands.
Lower the vehicle.