GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Savana - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement.

    2. Object Number: 1198943 Size: SH
  2. Remove the electrical connector.
  3. Remove the screw from the switch.
  4. Remove the indicator switch from the vehicle.

Installation Procedure

    Object Number: 1198943 Size: SH
  1. Connect the indicator switch to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the screw to the switch and tighten to 4 N·m (35 lb in).
  3. Install the electrical connector.
  4. Install the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement.